EML 2 EX LED (ZONE 2, 21, 22 )

Sections:

• 01 Description
• 02 Technical characteristics
• 03 Design and operation
• 04 Montage
• 05 Execution
• 06 Advantages

Description

The EML Ex LED linear luminaire is intended mainly for general lighting of halls, industrial spaces, production and storage zones 2, 21, 22 with the possibility of high dustiness, moisture, water splashes in the work
environment, including: technological lines of the chemical industry, oil, petrochemical, gas, energy, wood, paper, construction and food materials.

Technical characteristics

Technical parameters
Power supply	230 V AC/DC 50-60(0)Hz, 110V (according to versions) 230 V AC 50-60Hz – versions with battery
Atex marking for zones 2, 21
Atex marking for zones 2, 22	II 3G Ex ec IIC T6/T5 Gc II 3D Ex tc IIIC T85°C Dc
	EN IEC 60079-0:2018, EN 60079-7:2016, EN 60079-11:2012, EN 60079-18:2015, EN 60079-31:2014
Ingress protection	IP 66/67
IK protection class	IK 10
Protection class	I
Battery	3H – Ni-Cd 4,5 Ah 3,6V 4,8V 3H – LiFe Po 4,5 Ah 9,6V
	from -20°C to +50°C – versions without a battery – temp. class T6 from -20°C to +40°C – HP versions – temp. class T6 form 0°C to +40°C – versions with battery – temp. class T6
	from -20°C to +50°C – HP versions – temp. class T5 form 0°C to +50°C – versions with battery – temp. class T5
Cable gland	M20 or M25 (other on request)

Design and operation

• anti-glare diffuser grooved from the inside lenticular made of PC flammability class in accordance with the safety standard UL94: V-2, incandescent test with wire in accordance with (PN-EN 60695-11-2):
  850 ° C,
• body of reinforced structure made of polyester reinforced with glass fiber GRP class flammability in
  accordance with the safety standard UL94: HB, glow wire test in accordance with (PN-EN 60695-11-2): 650 ° C,
• diffuser fixing elements (hinged lampshade suspension), fitting fixing accessories made of stainless
  steel or plastic,
• EM emergency power module acc. to types,
• as an option DALI, PZH, CNBOP (according to versions),

Montage

A universal luminaire adapted to through and end wire supply through cable gland located on the transverse
side walls. The luminaire has mounting accessories enabling it to be mounted on the ceiling surface or from the side wall, it can also be hung on chains.

The EML Ex LED luminaire is equipped with 2 Ex cable glands with a seal diameter of 7-13 mm and an Ex plug. As an option, cable entries with a seal diameter of 8-17 mm are available (ordered separately).

Execution

Version with battery:

* power given when the luminaire is in light mode.

Optional distribution curves (please see LDT file):

– ../BW – lens with beam curve  BW;
– ../P – lens with beam curve P;
-../TB – lens with beam curve TB;
– ../.. – other;

Optional code:

-..B/ – zabudowany bezpiecznik;
-../ADR – version with address module,
-../AT – emergency version with self-test. The luminaire carries out an automatic test, signaling the operation status of the luminaire in the form of a built-in LED diode;
-../110 – 110V power supply,
-../OUT1 – version with EPDM gasket,
-../DR – version with breather drain,
-../10V – luminaire version with luminous flux adjustment from 10% to 100%;
-../DALI – version with DALI control;
-../II class – execution in protection class II (without CNBOP);
– ../..K – light colour..K (30K – 3000K; 65K – 6500K),
– ../RA.. – color rendering index,
-../3P – version with 3-phase through wire,
– ../CR – connector mounted on the cable,
-../K – end fitting without through-wire,
-../HP – versions with increased power and luminous flux;
-../AP – additional protection against corrosion;
-../RAL..- housing color according to RAL palette,
– ../SG – special cable gland with a choke diameter of 8-17mm,
– ../M25 – cable gland M25x1.5,
– ../AL – version with an aluminium gear tray,
-../CNBOP – luminaire with CNBOP approval.

Additional accessories:

– ../ST – tube mounting;
– ..DF – distance fixing for the pipe;
– ../WM – wall mounting;
– ../EH – eye mounting;
-../D – protective hood;
– ../JB.. – junction box;
-../SN1, SN2 – version equipped with a pictogram for indoor or outdoor use

Luminaires designed for cooperation with a central battery, additionally equipped with one of the following
address monitoring and switching modules:

ADR1 – ADR20-ILS,
ADR2 – TM-AM 01,
ADR3 – V-CG SE 4-400W,
ADR4 – V-CG-S 4-400W,
ADR5 – ADS 20,
ADR6 – ADN.

Luminaires are available as standard with the powers given in the table “types of execution”. Optionally,
versions with reduced power are available on request. Example of an order: EML Ex LED 1200/221/34/P/50K – a luminaire with a length of 1200mm, approved for operation in zones 2 and 21, with a power of 34 W with a “P” type lens, with LEDs with a color temperature of 5000K.

Advantages

• solid, compact structure,
• simple, easy and quick assembly,
• high resistance to industrial corrosive
  environment,
• high luminous efficiency,
• resistant to UV radiation,
• long life of light sources,
• possibility of building (as a through-hole).

OPTIONAL MOUNTING ACCESSORIES    

72 pipe mount, diameter 48-54 mm, other on request;
72-2258  – steel mesh;
72-2958  – adjustable wall mounting;
72-2966  – pipe mount, diameter 48-50 mm;

Optional distribution  curves
standard version	../BW	../P